Term project Demo video
Below is open source that will be used in my Term project.
#include <LCD5110_Graph.h>
LCD5110 myGLCD(A0,A1,A2,A3,A4);
extern uint8_t SmallFont[];
const int ServoA = 11;
const int ServoB = 10;
const int ServoC = 9;
const int ServoD = 6;
const int clockwise = 1700;
const int counterclockwise = 1300;
const int ButtonA = 8;
const int ButtonB = 7;
const int ButtonC = 5;
const int ButtonD = 4;
const int LEDready = 13;
const int coinInsert = 12;
long previousMillis = 0;
long intervalIdle = 500;
int LEDreadyState = LOW;
int y1= 0; int y2= 10; //position shifters for LCD txt
void setup() {
myGLCD.InitLCD();
myGLCD.setFont(SmallFont);
myGLCD.setContrast(70);
pinMode(ButtonA, INPUT_PULLUP);
pinMode(ButtonB, INPUT_PULLUP);
pinMode(ButtonC, INPUT_PULLUP);
pinMode(ButtonD, INPUT_PULLUP);
pinMode(LEDready, OUTPUT);
pinMode(coinInsert, INPUT_PULLUP);
myGLCD.invert(true);
myGLCD.print("VenDuino", CENTER, 1);
myGLCD.print("by Ryan", CENTER, 10);
myGLCD.print("(c) 2017", CENTER, 30);
myGLCD.drawRoundRect(13, 0, 70, 8);
myGLCD.drawRect(0, 20, 83, 47);
myGLCD.update(); delay(1000);
myGLCD.clrScr();
myGLCD.update(); }
void loop()
{ //--Blink Ready LED---------------------------------------------------
unsigned long currentMillis = millis();
if(currentMillis - previousMillis >= intervalIdle) { // save the last time you blinked the LED previousMillis = currentMillis;
if (LEDreadyState == LOW){ // if the LED is off turn it on and vice-versa:
LEDreadyState = HIGH;
myGLCD.clrScr();
myGLCD.print("Please insert", CENTER, y1);
myGLCD.print(" $0.25. ", CENTER, y2);
myGLCD.invert(false);
myGLCD.update(); }
else
LEDreadyState = LOW;
digitalWrite(LEDready, LEDreadyState);// set the LED with the ledState of the variable:
y1=y1 +5; y2=y2+5; //shift the text position down
if ((y1==35) && (y2== 45)) //when the text almost goes off-screen, move it back up
{y1=0; y2=10; }
}
//---Wait for Coin/Credit---------------------------------------------------------------
while (digitalRead(coinInsert)==LOW) { //if coin inserted stay in servo enable loop
digitalWrite(LEDready, HIGH);
myGLCD.clrScr(); myGLCD.update();
myGLCD.print("Please make", CENTER, 0);
myGLCD.print(" a selection. ", CENTER, 10);
myGLCD.drawRect(20, 20, 63, 47);
myGLCD.drawRect(20, 20, 41, 47);
myGLCD.drawRect(20, 20, 63, 34);
myGLCD.update();
servoEnable(); }
}
void servoEnable(){
while (digitalRead(ButtonA) == HIGH || digitalRead(ButtonB) == HIGH ||
digitalRead(ButtonC) == HIGH || digitalRead(ButtonD) == HIGH) {
//---------Servo A----------------------------------------------------
if ((digitalRead(ButtonA) == LOW) ) {
for(int i=0; i<2; i++)
{digitalWrite(LEDready, HIGH); delay(50); digitalWrite(LEDready, LOW); delay(50); }
myGLCD.clrScr(); myGLCD.print("Vending", CENTER, 0);
myGLCD.drawRect(20, 20, 63, 47); myGLCD.drawRect(20, 20, 41, 47);
myGLCD.drawRect(20, 20, 63, 34); myGLCD.print("A1", 25, 24);
myGLCD.update();
for(int i=0; i<57; i++) // change this to adjust +- full revolution
{
digitalWrite(ServoA,HIGH);
delayMicroseconds(clockwise);
digitalWrite(ServoA,LOW);
delay(18.5); // 18.5ms
//delay(50); enable this line to slow servo rotation
}
break; } // when item is dispensed exit loop and return to wait for
coin
//---------Servo B----------------------------------------------------
if ((digitalRead(ButtonB) == LOW) ) {
for(int i=0; i<2; i++)
{digitalWrite(LEDready, HIGH); delay(50); digitalWrite(LEDready, LOW); delay(50); }
myGLCD.clrScr(); myGLCD.print("Vending", CENTER, 0);
myGLCD.drawRect(20, 20, 63, 47); myGLCD.drawRect(20, 20, 41, 47);
myGLCD.drawRect(20, 20, 63, 34); myGLCD.print("B1", 46, 24);
myGLCD.update();
for(int i=0; i<57; i++)
{
digitalWrite(ServoB,HIGH);
delayMicroseconds(clockwise);
digitalWrite(ServoB,LOW);
delay(18.5); // 18.5ms
//delay(50);
}
break; }
//---------Servo C----------------------------------------------------
if ((digitalRead(ButtonC) == LOW) ) {
for(int i=0; i<2; i++)
{digitalWrite(LEDready, HIGH); delay(50); digitalWrite(LEDready, LOW); delay(50); }
myGLCD.clrScr(); myGLCD.print("Vending", CENTER, 0);
myGLCD.drawRect(20, 20, 63, 47); myGLCD.drawRect(20, 20, 41, 47);
myGLCD.drawRect(20, 20, 63, 34); myGLCD.print("C2", 25, 37);
myGLCD.update();
for(int i=0; i<57; i++)
{
digitalWrite(ServoC,HIGH);
delayMicroseconds(clockwise);
digitalWrite(ServoC,LOW);
delay(18.5); // 18.5ms
//delay(50);
} break; }
//---------Servo D----------------------------------------------------
if ((digitalRead(ButtonD) == LOW) ) {
for(int i=0; i<2; i++)
{digitalWrite(LEDready, HIGH); delay(50); digitalWrite(LEDready, LOW); delay(50); }
myGLCD.clrScr(); myGLCD.print("Vending", CENTER, 0);
myGLCD.drawRect(20, 20,63,7); myGLCD.drawRect(20, 20, 41, 47);
myGLCD.drawRect(20, 20, 63, 34); myGLCD.print("D2", 46, 37);
myGLCD.update();
for(int i=0; i<57; i++)
{
digitalWrite(ServoD,HIGH);
delayMicroseconds(clockwise);
digitalWrite(ServoD,LOW);
delay(18.5); // 18.5ms
//delay(50);
}
break; }
}
}
Comments